We Deliver!
Manhattan, Brooklyn, Bronx, Queens, Long Island & You! | Directions to New York Showroom6/27/08
Remove Permanent Marker Ink From Furniture
This article provided as a public service. Bear Office Furniture is not responsible for its contents or your results.
Steps
- Use white paste, not the gel kind, and simply put a small amount directly onto the wood furniture. With either a soft bristle toothbrush or a soft rag, start making circular motions and rubbing the paste into the marker.
- Be patient. You may have to do several applications before the marker is completely removed.
- When the paste has basically taken on the color of the marker, wipe clean and then start with step 1 again.
Tips
- Try White board cleaner spray. It works great! Before you start, test the paste on a part of the furniture that's not normally visible, to make sure that it won't strip the paint.
- Try Mr. Clean Magic Eraser, it works, even on bamboo items! Use furniture oil if the sheen gets rubbed off.
Source: wikiHow
Labels: cleaning, economy, restoration
We Deliver!
Manhattan, Brooklyn, Bronx, Queens, Long Island & You! | Directions to New York ShowroomFurniture Refinishing
This article provided as a public service. Bear Office Furniture is not responsible for its contents or your results.
Steps
- It is safer to use environmentally friendly furniture refinishing products to reduce the strain on the environment and to preserve the lifespan of your furniture. In the past, people used to finish furniture with lacquer, which is dark and dense and hides the beauty of the furniture. With that type of finish, the furniture is inclined to have white marks and humidity marks. A natural wood finish or a much more vibrant colored finish is a choice you can make for your furniture. To spruce up your Danish furniture from looking so drab, a glossy finish is suggested.
- If you use an environmentally natural furniture finish, you will find that your furniture will regain its original beauty. Learning how to refinish your furniture can cost you so much less than buying new furniture.
- A lot of people prefer to buy new furniture because of the work involved in furniture refinishing. There are other people who don?t have the patience in completing it and end up having a terrible finish or just give up and go out to buy new furniture. One thing to remember is that ?Rome was not built in a day,? and it will require time to complete any furniture-refinishing project.
- Take a trip to your local hardwood store where trained professionals are there to help you to choose the right product for your refinishing project. You want to ditch the caustic chemicals and select a natural product for your safety. If you don?t mind working with chemicals, you must use these with care. Do not smoke while using these chemicals. Chemical strippers can be dangerous when inhaled, so wear a mask and gloves. If you are sanding inside the home, be sure to seal all air ducts and electrical outlets.
- If you have to use any kind of power tools, be sure to use earplugs. Unplug your sander when you are getting ready to change the sander paper. Tools that you will need to begin your project are sander, electric drill, putty knife, bristle brush, paint scraper, safety goggles or mask, sanding block, chisel, canvas, rubber gloves, rubber pallet, paint brush and seam roller.
- You have to clean the surface of the furniture before you get started. You can clean it with a wax remover or wood cleaner. Cleaning the surface will determine if the furniture is worth refinishing.
- To determine what finish was previously use, follow these simple steps:
- Soak a small cotton ball in alcohol.
- Put this on a concealed area of the furniture and leave for about ten minutes.
- If you see any type of dissolving, then the finish is shellac.
- If you don?t see any type of dissolving, then go ahead and test a lacquer thinner in a concealed area. If this dissolves, then the finish is lacquer.
- It these two tests are unclear, you may then be dealing with a varnish or synthetic finish. If the previous finish looks like it is simply worn out, you may be able apply the same finish easily.
- If you are doing a full finish, make sure you strip the furniture and then begin to sand it down. Sandpaper of 100 to 200 grits is recommended. You should make sure you change the sandpaper often to get a better finish. If you don?t change it often, then it becomes of no use and you may be polishing instead of sanding at that point. An orbital sander is the best sander to use because it operates at about 8,400 orbits per minute. A padded sanding block gives you an edge over reaching difficult areas.
- You apply a sealer after you stain the furniture. Make sure the surface is smooth and then go ahead and apply the finish smoothly to prevent any streaks or bubbles.
Labels: ecology, economy, recycling, restoration
We Deliver!
Manhattan, Brooklyn, Bronx, Queens, Long Island & You! | Directions to New York ShowroomHow To Move Heavy Furniture
This article provided as a public service. Bear Office Furniture is not responsible for its contents or your results.
Steps
- Buy Sliders of appropriate size at your local hardware or homegoods store (or national chains like Home Depot or Lowes).
- Lift each corner and put a Slider underneath so that the smooth edge is towards the floor.
- Move the furniture, holding it low, once all corners have sliders - because the friction is almost eliminated and the furniture moves very easily.
Tips
- Another way of moving a heavy object is by putting broom handles underneath, and just rolling on these.
- Sliders are made for use on carpeting.
- If you have wooden floors, put a piece of old carpet or a rag under each leg before you move an item of furniture; it will slide more easily and won't scratch the floor.
- If you continually move the furniture and not stop halfway, it will be easier to push. Friction greatly increases when something comes to a stop.
Warnings
- Do not use this technique to move very heavy tall objects like book shelves - as they might fall and cause damage and/or more work. The best way to move them is to empty all the books first.
Labels: furniture moving, office relocation, office safety
We Deliver!
Manhattan, Brooklyn, Bronx, Queens, Long Island & You! | Directions to New York Showroom6/20/08
Office Furniture Liquidation Sale
All of these file cabinets are capable of both legal or letter sized filing, as they contain adjustable rods for setting the filing document hanging folder width to either size. All file cabinets are in guaranteed working condition, and have their safety mechanisms intact, so you won't see any broken drawers here. Only top of the line brand products in excellent working condition.
Bring your space measurements with you if you're not sure of how many cabinets you can fit into your storage room. We do offer inside setup and delivery by our professional fleet of installer/drivers, so let us know if you're needing a ground floor or stairs delivery, and what town you are needing to receive your items.
We also feature closeouts on desks and workstations, and floor sample sales of quality products in near-new condition. Furnish your home office or business suite with our best buys for the budget at Bear Office Furniture in New York, today.
Labels: closeout, preowned, used file cabinets